Industrial Metrology Components » Gage

Quick Digit – Digital Dial Indicators

marposs — Sun, 18 Nov 2007 17:09:46 +0000

Easy to operate electronic dial gage combining long travel and high accuracy.

Aluminium housing, polyamide front cover

Highly accurate capacitive measuring system

Log on, follow the link: Quick Digit – Digital Dial Indicators

M4 Manual Ring

marposs — Fri, 10 Aug 2007 17:18:40 +0000

Electronic manual ring gauge with full-bridge (LVDT) transducer for checking outside diameters of shaft and pin type parts in the range 4 to 100 mm (.16 ‚Äùto 3.98 ‚Äù).

Particularly suitable to perform measurements close to a shoulder, it can be used both directly on the workpiece and as a simple fixture using the optional support.

It is composed of a ring body and standard interchangeable nosepiece; within its range of use each ring is completely retoolable by changing the nosepiece and the contacts.

Accurate, rugged and reliable, needs no maintenance and has practically no operating costs.

Thanks to its outstanding qualities, it can be used in the most difficult working conditions without any effect on its technical characteristics.

The measurement value can be displayed on the TESTAR E18, E4, E4N and, through the Gage Box‚Ñ¢ data acquisition system, on the E9066s‚Ñ¢ Industrial PC.

Follow the link to get more information: M4 Manual Ring

Bore Gauge: M1 Electron

marposs — Fri, 15 Jun 2007 22:44:30 +0000

Manual Bore Gauge With LVDT Transducers

Electronic manual bore gauge with full-bridge (LVDT) transducer for checking inside diameter of blind and thru bores in the range from 3 to 300 mm (.12″ to 11.81″), using interchangeable standard components.

Within its range of use each plug is completely retoolable by changing the nosepiece and the contacts. For zero setting only one master is needed due to the extensive range of linearity of the transducer.

Accurate, rugged and reliable, needs no maintenance and has practically no operating costs. Thanks to its outstanding qualities (waterproofness, resistance to impact or falls, cable tear resistance), it can be used in the most difficult working conditions without any affect to its technical characteristics.

It can be used both directly on the workpiece and as a simple fixture using the optional support.

The measurement value can be displayed on the TESTAR E18, E4, E4N and, through the Gage Box™ data acquisition system, on the E9066s™ Industrial PC.

To know more: Bore Gauge: M1 Electron

Manual Bore Gauge With HBT Transducers – M1 C

marposs — Wed, 23 May 2007 20:37:31 +0000

Electronic manual bore gauge with half-bridge (HBT) transducer for checking inside diameter of blind and thru bores in the range from 9 to 120 mm (.35″ to 4.72″), using interchangeable standard components.

It can be used both directly on the workpiece and as a simple fixture using the optional support.

The measurement value can be displayed on the TESTAR Quick Read Microcolumn, E4N and, through the Easy Box and Gage Box™ data acquisition systems, on the E9066s™ Industrial PC.

Models compatible with third parties electronics can be supplied on request.

Follow the link to know more Manual Bore Gauge With HBT Transducers

Gauges for Car Body

marposs — Wed, 09 May 2007 20:52:33 +0000

Fixture for Inspection of Chassis and Car Body Components

Marposs can provide modular and reconfigurable fixtures for the inspection of sculptured parts for automotive and aerospace industries.

The reconfigurability feature makes modular systems particularly recommended for prototyping and whenever high variability of production is required.

The part is measured by means of Digi Crown™ digital pencil probes or, alternatively, Red Crown™ analogue pencil probes and Gage Box™ modular data acquisition system.

The output signals of the pencil probes are elaborated and displayed by industrial PC E9066T™ or by a commercial PC, with Quick SPC™ process and quality control software.

Here it is the link to click on to know more about the Gauges for Car Body

Gauges for Glass

marposs — Thu, 19 Apr 2007 09:01:26 +0000

Fixtures for Inspection of Automotive Glass

Marposs can provide modular and reconfigurable fixtures for the measurement of curved glass panels.
The reconfigurability feature makes modular systems particularly recommended for prototyping and whenever high variability of production is required.
The glass can be measured, either on the surface or on the edge, by means of Digi Crown™ digital pencil probes or, alternatively, Red Crown™ analogue pencil probes and Gage Box™ modular data acquisition system. The output signals of the pencil probes are elaborated and displayed by industrial PC E9066T™, or by a commercial PC, with Quick SPC™ process and quality control software and Glass Add-On, a software specifically developed for the measurement of automotive glass, including a “best-fit” algorithm that can be applied to the measured data for providing real time.

Click on the link to know more on the Gauges for Glass