Industrial Metrology Components » Lvdt

TCI 1 Transducer Conditioning Interface

marposs — Mon, 23 Jun 2008 20:50:30 +0000

TCI 1 is a single-channel signal conditioning module, with analog output, for LVDT or HBT transducers. Designed for measuring components suppliers and machine makers, it is used for direct connection of sensors to a PLC to carry out dimensional measurements or part positioning.

Thanks to its robustness, waterproofness (IP54 protection degree) and connection simplicity, it can be easily placed in the machine, while the possibility to connect a wide range of sensors allows to meet any application requirement.

To know more about the TCI 1 Transducer Conditioning Interface, follow the link dimensional measurements

The Red Crown™ pencil probes line

marposs — Tue, 20 May 2008 15:18:55 +0000

Line of pencil probes with LVDT and HBT high precision position transducers

The Red Crown pencil probes line developed by TESTAR, a MARPOSS division, to fulfil quality control requirements in the workshop is available in four variants:

Basic line:

A family of 52 standard models covering a measuring range from ± 0,5 mm to ± 5 mm. The pencil probes are supplied with full-bridge (LVDT) or half-bridge (HBT) transducer already calibrated for connection to any TESTAR electronic display units such as E18, E4, E4N, Quick Read™ Microcolumn and, through the data acquisition systems Easy Box and Gage Box™ to E9066s™ Industrial PC.

Compatible line:

A comprehensive list of probes covering the TESTAR standard measuring ranges with appropriate electrical connector and calibrated to comply with your existing electronic display unit.

Unplugged line:

The 52 standard models of the basic line can also be provided without connector. Based on established electrical characteristics supplied with each probe the user can add the necessary connector and perform the appropriate calibration to the electronics in use.

Soft touch line:

Pencil probes especially designed with very low measuring force to directly gauge delicate parts such as glass, TV tubes, car windshields and plastic material. They can therefore satisfy specific measurement requirements where the tip force must consistently be kept at a very minimum value (it is 0,3 N with spring push models and 0,06 N with models without spring).

These probes can be supplied in basic or compatible configuration.

Reliability and durability are assured in all models through innovative design and the use of the most suitable materials, developed thanks to TESTAR’s extensive experience in the quality control sector. Red Crown pencil probes assure precision measurements, even below one micron, and contribute to the quality of measurement data.

Quick Probe™

marposs — Thu, 20 Dec 2007 20:59:07 +0000

Pencil Probes with LVDT and HBT Transducers for use with Quick Block™ or AMA™ Components

8 models of full-bridge (LVDT) and half-bridge (HBT) probes with clamping diameter 8 mm or 3/8” and measuring range ± 1 mm (.04 ”), to be used with mechanical transmission devices.

To know more follow the link: Quick Probe

Quick Block – Universal Measuring Armsets

marposs — Mon, 15 Oct 2007 16:47:44 +0000

This gauge block is a universal measuring armset with axial movement for inspection of internal and external diameters and distances on multigauging devices. It is available in two versions:

as complete single measuring unit [measuring range ¬± 1 mm (.04")] with built-in full-bridge (LVDT) or half-bridge (HBT) transducer also compatible with any electronics already present on the market.
as simple mechanical transmission, to be used with other measuring gauges with clamping diameter 8 mm or 3/8‚Äù, such as TESTAR Red Crown™ pencil probes, Quick Probe™, Quick Read™ and Quick Digit™.

Follow the link to know more: Quick Block – Universal Measuring Armsets

Bore Gauge: M1 STAR EBG

marposs — Thu, 21 Jun 2007 23:46:39 +0000

Manual Electronic Bore Gauge with LVDT or HBT Transducers

M1 Star EBG (Electronic Bore Gauge) is the brand new line of Marposs highly advanced manual electronic gauges for bore inspection.

M1 Star EBG draws from the experience of M1 Electron, the market best-selling solution in the last 20 years, with more than 100,000 units delivered.
The integrated-transducer design eliminates any kind of friction in the mechanical transmission, thus allowing excellent metrological performances, while guaranteeing high reliability and durability in the most severe production environment.

Thanks to its modular and versatile design, M1 Star EBG can offer a large number of unique features, such as:

Sub-micron accuracy in a wide measuring range (3 to 300 mm diameter)
Robust, shock-proof construction
IP 67 degree of protection against water and coolant
Zero-setting requiring only one master ring
Easy replacement of cable in case of damage
Compatibility to all Marposs electronic units and other OEMs standards

A state of the art production system specifically developed for this new product allows the Marposs international sales organization to guarantee competitive prices and fast delivery times for both the M1 Star EBG and the relevant setting rings.

EBG bore gauges are supplied with fully integrated LVDT or HBT transducer to suit MARPOSS or compatible electronics.

M1 Star EBG will be available at the beginning of 2006 also as wireless version featuring Bluetooth?Ç¬Æ (*) transmission. This model will use the same “measuring core” as the model with cable, while differing from it just for the handle which accomodates the transmitter. These characteristics make M1 Star?¢‚Äû¬¢ Wireless easy to operate and offering the same excellent performance as the regular EBG version.
By pressing on a button the real time measurement value is sent to the receiver located onto the display unit.
M1 Star Wireless can be connected to any MARPOSS E9066 series Industrial PC.

To know more about the Bore Gauge: M1 STAR EBG: Manual Electronic Bore Gauge with LVDT or HBT Transducers