Thanks to its robustness, waterproofness (IP54 protection degree) and connection simplicity, it can be easily placed in the machine, while the possibility to connect a wide range of sensors allows to meet any application requirement.

To know more about the TCI 1 Transducer Conditioning Interface, follow the link dimensional measurements

• as complete single measuring unit [measuring range ¬± 1 mm (.04")] with built-in full-bridge (LVDT) or half-bridge (HBT) transducer also compatible with any electronics already present on the market.
• as simple mechanical transmission, to be used with other measuring gauges with clamping diameter 8 mm or 3/8‚Äù, such as TESTAR Red Crown™ pencil probes, Quick Probe™, Quick Read™ and Quick Digit™.

Follow the link to know more: Quick Block – Universal Measuring Armsets

Particularly suitable to perform measurements close to a shoulder, it can be used both directly on the workpiece and as a simple fixture using the optional support.

It is composed of a ring body and standard interchangeable nosepiece; within its range of use each ring is completely retoolable by changing the nosepiece and the contacts.

Accurate, rugged and reliable, needs no maintenance and has practically no operating costs.

Thanks to its outstanding qualities, it can be used in the most difficult working conditions without any effect on its technical characteristics.

The measurement value can be displayed on the TESTAR E18, E4, E4N and, through the Gage Box‚Ñ¢ data acquisition system, on the E9066s‚Ñ¢ Industrial PC.

Follow the link to get more information: M4 Manual Ring

M1 Star™ is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
Application experience gained over many years with the M1 Electron (integrated-transducer) bore gauge now enables MARPOSS to offer a line of bore gauges that can satisfy measuring needs of any kind.
The M1 Star™ MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper

Follow the link to know more about the The M1 Star™ MBG (Mechanical Bore Gauge):
Manual Mechanical Bore Gauge with Mechanical or Electronic Dial Indicators or Pencil Probe

Electronic manual bore gauge with full-bridge (LVDT) transducer for checking inside diameter of blind and thru bores in the range from 3 to 300 mm (.12″ to 11.81″), using interchangeable standard components.

Within its range of use each plug is completely retoolable by changing the nosepiece and the contacts. For zero setting only one master is needed due to the extensive range of linearity of the transducer.

Accurate, rugged and reliable, needs no maintenance and has practically no operating costs. Thanks to its outstanding qualities (waterproofness, resistance to impact or falls, cable tear resistance), it can be used in the most difficult working conditions without any affect to its technical characteristics.

It can be used both directly on the workpiece and as a simple fixture using the optional support.

The measurement value can be displayed on the TESTAR E18, E4, E4N and, through the Gage Box™ data acquisition system, on the E9066s™ Industrial PC.

To know more: Bore Gauge: M1 Electron

Within its range of use each plug is completely retoolable by changing the nosepiece and the contacts. For zero setting only one master is needed due to the extensive range of linearity of the transducer.

Accurate, rugged and reliable, needs no maintenance and has practically no operating costs. Thanks to its outstanding qualities (waterproofness, resistance to impact or falls, cable tear resistance), it can be used in the most difficult working conditions without any effect on its technical characteristics.

It can be used both directly on the workpiece and as a simple fixture using the optional support.

The measurement value can be displayed on the TESTAR Quick Read Microcolumn, E4N and, through the Easy Box and Gage Box™ data acquisition systems, on the E9066s™ Industrial PC.

Models compatible with third parties electronics can be supplied on request.

Follow the link to know more Manual Bore Gauge With HBT Transducers

It can be configured according to specific application needs, employing different transducer modules provided with 1, 2 or 4 input channels.
It can be programmed via local keypad or PC (by means of the specific E4N-PC LINK software, which also allows data collection).

To learn more about the E4N-Microprocessor Column Measurement Display Unit